Il-kumpanija tagħna hija ħdejn il-bażi tal-produzzjoni tal-isponża tat-titanju ta 'kwalità għolja, u x-xiri tal-materja prima huwa magħmul minn sponża tat-titanju ta' grad 0 u grad 1, li jiggarantixxi b'mod fundamentali l-kwalità tal-prodott u jistabbilixxi l-pedament għall-ipproċessar sussegwenti ta ' il-prodott u l-kwalità tal-prodott finali.
At present, the industrial method for the production of titanium metal is the Kraul method, and the product is titanium sponge. The traditional process of making titanium is to melt and cast sponge titanium into ingots, and then process them into titanium. According to this, the main steps of the technological process from mining to making titanium are: titanium ore -> mining -> beneficiation -> too concentrate -> enrichment -> titanium-rich material -> chlorination -> crude TiCl4-> Refining -> Pure TiCl4-> Magnesium reduction -> Sponge titanium -> Casting -> Titanium ingots -> Processing ->Materjal tat-titanju jew partijiet tat-titanju. Preparazzjoni kimika ta' TiCI4 mhux raffinat. Barra minn hekk, l-operazzjoni tal-ikkastjar għandha tkun proċess metallurġiku, iżda xi drabi hija wkoll ikklassifikata bħala proċess ta 'proċessar.
L-ipproċessar fil-proċess ta 'hawn fuq jirreferi għall-ipproċessar u l-ikkastjar tal-plastik. Metodi ta 'pproċessar tal-plastik jinkludu forġa, estrużjoni, rolling, tiġbid u l-bqija. Jista 'jipproċessa ingotti tat-titanju f'diversi daqsijiet ta' kejkijiet, ċrieki, pjanċi, pajpijiet, vireg, profili u prodotti oħra, u jista 'wkoll jiġi mitfugħ f'diversi forom ta' partijiet u komponenti. L-ipproċessar tal-plastik ta 'titanju u ligi tat-titanju għandu l-karatteristiċi ta' reżistenza kbira għad-deformazzjoni; differenza fil-plastiċità tat-temperatura normali, limitu ta 'rendiment għoli u proporzjon ta' limitu ta 'saħħa, rebound kbir, sensittiv għal talji, faċli biex tingħaqad ma' forom waqt id-deformazzjoni, u faċli biex jassorbi gassijiet ta 'ħsara meta msaħħna, eċċ L-ipproċessar tal-plastik huwa aktar diffiċli mill-azzar u r-ram.
Għalhekk, it-teknoloġija tal-ipproċessar tat-titanju u l-ligi tat-titanju għandha tikkunsidra dawn il-karatteristiċi tagħhom.
Titanium adopts plastic processing, the processing size is not limited, and it can be mass-produced, but the yield rate is low, and a large amount of scraps and residues are generated during the processing. In view of the above shortcomings of titanium plastic processing, powder metallurgy technology has been developed in recent years. The powder metallurgy process of titanium is the same as ordinary powder metallurgy, but the sintering must be carried out under vacuum. It is suitable for the production of large-volume, small-sized parts, and is especially suitable for the production of complex parts. This method requires almost no processing and has a high yield rate. It can not only make full use of titanium waste as raw materials, but also reduce production costs, but it cannot produce large-size titanium parts. The powder metallurgy process of titanium is: titanium powder (or titanium alloy powder) -> sieving -> mixing -> press forming -> sintering -> auxiliary processing ->prodotti tat-titanju.
